Dixon 2003 Manuel d'utilisateur télécharger pdf (Page 44)

CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE:

There are a total of (4) threaded adjusters which will

control the attitude or pitch of the mower deck. The

adjusters have locknuts on the bottom which can be

turned up or down to raise or lower the front and rear

of the mower deck. Deck should be level or pitched

slightly higher in rear.

A. Place the mower on a smooth level

surface with front casters positioned

towards deck. Check tire pressures to

insure the mower has a correct stance.

Inflate tires as required:

Front: 16 - 21 lbs maximum

Rear : 8 -14 lbs maximum

NOTE: To insure accuracy of leveling

procedure, mower deck drive belt must be

installed prior to leveling deck.

B. Wear heavy gloves. Turn each outer blade

tip to align with the deck or in a side-to-side

manner.

C. Measure from the floor surface up to the

bottom of the blade tip on the discharge

side of the mower deck. Retain this

measurement. Move to the opposite side,

check that measurement is the same. If

adjustment is required, turn the nut on the

bottom of the front threaded adjuster up or

down until both side-to-side measurements

are equal. Retain measurement.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

Pas de commentaire

Dixon 2003 Manuel d'utilisateur Page 44