Dixon 2003 Manuel d'utilisateur télécharger pdf (Page 53)

CARE AND MAINTENANCE

PROCEDURE FOR ELECTRIC CLUTCH ADJUSTMENT

(CONTINUED):

B. OHMS TEST

1. Disconnect clutch from mower wiring harness.

2. Attach the two leads on multi-meter to the two

wires coming from the electric clutch.

3. The reading you receive should be between 2.5

to 4.0 OHMS.

4. If the resistance is outside this range, the clutch

coil is faulty.

5. If the clutch coil is faulty, the clutch must be

replaced.

Figure 2

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59 60

Pas de commentaire

Dixon 2003 Manuel d'utilisateur Page 53